Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

optional calculations - EVAL_VALUES:
When activated, the values for dew point, wind chill temperature, heat index and perceived temperature and - if a particulate matter sensor DP200 / WH41 / WH43 is available - the current AQI value and its 24-hour average are calculated from the available measured values and those coming from the weather station Data for export processing (UDP, WU, CSV, W4L, ...) added. Values already coming from the weather station may NOT be overwritten. If the storm warning is activated, the air pressure trend and the change in air pressure are also calculated from v0.06 calculated  (for the last hour and for the last 3 hours).

...

"FWD_TYPE" defines the format in which the forwarded messages are to be sent to the weather station.
The WU format should be selected for WU-compatible servers. For other scenarios there is also the UDPGET format, in which the possibly converted metric values are sent as with UDP (but not separated by spaces but by html-conforming "&"). Virtual http inputs should be possible with this.
The EW format is experimental. Incoming messages from the weather station are converted into the Ecowitt format and forwarded in the Ecowitt protocol via HTTP mail. This means that other hosts can also be operated using the Ecowitt protocol (relay).
With type RAW, the incoming data is forwarded via http-get without conversion. In order to send the original RAW string via POST without any extension in the EW format, the RAWEW type is recommended. The RAW data can also be sent via UDP via RAWUDP. Destination-ip: destination-port must then be specified as FWD_URL. If you need to send the output data to another destination via UDP you may use the FWD_TYPE UDP. The destination address and port are defined via destination-ip: port as FWD_URL.
Also from v0.06, the The values of an existing particulate matter sensor DP200 / WH41 required for the luftdaten.info service can be sent via type LD:

...